OPERATION METHOD
1. Blower operation
• Hold the machine firmly during operation.
• Direct the nozzle end toward the object to be dusted and pull the trig-
ger lever.
• The trigger lever can be fixed in an arbitrary position with the cruise
control lever.
• Maintain the trigger lever at a position where the engine speed appro-
priate for the operation is obtained and set the cruise control lever to
the "ON" position.
• To adjust the engine speed, set the cruise control lever to the "OFF"
position once, adjust the engine speed with the trigger lever again,
then set and fix the cruise control lever to the "ON" position.
• Operation of the trigger lever with the cruise control lever in the "ON"
position may cause failure.
• The lower portion of the fuel tank acts as an assist handle, which
enables operation with both hands. In this case, be sure to hold the assist handle with a right hand.
2. Dust Collection Operation
• Do not allow kerosene, gasoline, or lighted cigarette to be sucked into the machine.
- Otherwise, fire may occur.
• Do not allow foreign materials, such as large wood chips, metals, glass, pebbles, etc., to be sucked into the machine.
- Otherwise, failure may occur.
• Overfilling of the dust bag may cause its overflow toward the engine side. Empty the bag before it becomes completely full.
- Otherwise, fire may occur.
• Carry the dust bag belt on the shoulder and adjust the belt length to ensure easy operation.
• Confirm that the dust bag is not twisted and pull the trigger lever to start dust collection.
• When the dust bag is full, remove the dust bag from the machine and open the fastener to empty the
bag.
If this machine is operated with the protector oriented upwards or the main handle downwards, white smoke may appear, oil may be contami-
nated or oil may leak.
WARNING
NOTE
13