System Q - Kenwood KRC-609 Manual De Instrucciones

NOTE
Source tone memory
Each source (tape, CD, MD, FM, AM and disc changer) has its
own memory in which to store the bass, middle, and treble tone
settings.
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment
Operation of Audio control button
mode
4 button
(Display)
Bass decreased.
Bass ("Bass")
Middle decreased.
Middle("Middle")
Treble decreased.
Treble("Treble")
Left channel emphasized.
Balance("Balance")
Rear channel increased.
Fader ("Fader")
The sound level of
Volume Offset
("V Offset") each source decreased.
4
Press the AUD button to end the control mode.
NOTE
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
¢ button
Bass increased.
Middle increased.
Treble increased.
Right channel emphasized.
Front channel increased.
The sound level of
each source increased.
— 7 —

System Q

You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Scan of Flat – Easy
(Default setting)
User memory*
Flat
Rock
As you proceed, each indicator would go on.
NOTE
The System Q function changes the values of the following
sound quality parameters:
Bass center frequency, bass level, bass quality factor, bass
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, and treble level.
Their setting values are different depending on the setting of the
speaker setting mode.
Easy
Jazz
Pops
*User memory:
The unit returns to the state
Top 40
adjusted the last time with
the audio control setting feature.