Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-716-005.book Page 23 Wednesday, December 3, 2014 11:12 AM
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Rear handle (insulated gripping surface)
2 Lock-off button for On/Off switch
3 On/Off switch
4 Oil filler cap
5 Activation lever for kickback brake (hand guard)
6 Front handle (insulated gripping surface)
7 Deactivation mark "for kickback brake"
8 Nose sprocket
9 Chain guard
10 Saw chain
11 Chain bar
12 Gripping teeth
13 Chain-tensioning ring (red)
Technical Data
Chain saw
Article number
Rated power input
Chain speed (no-load)*
Chain bar length
Braking duration of the kickback brake
Braking duration of the run-down brake
Chain pitch
Drive link thickness
Amount of drive links
Oil reservoir capacity
Automatic chain oiler
Toolless chain tensioning (SDS)
Overload Protection
Soft starting
Constant electronic control
Weight according to EPTA-Procedure 01/2003
Protection class
*limited via electronic control
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-13.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95 dB(A); Sound power level
103 dB(A). Uncertainty K =2 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
2
a
=6 m/s
, K=1.5 m/s
.
h
Bosch Power Tools
14 Locking knob
15 Cover
16 Serial number
17 Symbol for rotation and cutting direction
18 Drive sprocket
19 Oil outlet
20 Guide fin for chain bar
21 Fastening bolt
22 Chain tensioning catch
23 Chain catch bolt
24 Oil level gauge
25 Reset button for thermal safety switch
26 Red dot
27 Protective lid of chain-tensioning mechanism
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
GKE 35 BCE
0 601 597 6..
W
2100
m/s
12
cm
35
s
<0.1
s
<1
mm
9.525
(")
(3/8)
mm
1,3
52
ml
200
kg
4.6
/II
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
English | 23
GKE 40 BCE
0 601 597 7..
2100
12
40
<0.1
<1
9.525
(3/8)
1,3
57
200
4.8
/II
1 609 92A 11D | (3.12.14)
Publicidad
