Publicidad
Idiomas disponibles
Idiomas disponibles
for VAG 1.6 & 2.0L TDI Common Rail
TOOLS
1
Injection Pump / Camshaft Alignment Pin, to be used as OEM T20102, 3359
2
Crankshaft Pulley Locking Tool, to be used as OEM T10050
3
Crankshaft Pulley Locking Tool, to be used as OEM T10100
4
Tensioner Pulley Adjustment tool (2.4mm Hex key), to be used as OEM T10264
5
Tensioner Pulley Locking tool, to be used as OEM T10265
6
Auxiliary Tensioner Locking tool (3.9mm), to be used as OEM T40098
7
Sprocket Holding Tool, to be used as OEM T10051
8
Cam Sprocket Hub Puller, to be used as OEM T10052
9
Oil pump / Balancer Shaft Alignment, to be used as OEM T10255
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This Set includes essential tools for timing belt replacement on 1.6 and 2.0 Common Rail TDI engines
and allows locking and adjustment of flywheel (crankshaft), camshaft, idler pulley.
Further information regarding the item and a list of suitable motors and models can be found on our
website:
www.bgstechnic.com
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 66200
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
