Sauder OFFICE WORKS AFFIRM Serie Instrucciones De Montaje página 19

Step 13
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D579 and D580).
å
Fasten the DRAWER RIGHT (40CC) to the RIGHT DRAWER SIDE (D579)
and the DRAWER LEFT (40CD) to the LEFT DRAWER SIDE (D580). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #2 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted
hole in the SLIDE.
å
Repeat this step for the remaining small DRAWER.
3
4
www.sauder.com/commercial-office/service
Roller end
1
2
D580
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D579
3
4
3S
Center the screw in the oval hole.
427873
5
10A
Roller end
1
2
Drawer Slide
Page 19