Sauder OFFICE WORKS AFFIRM Serie Instrucciones De Montaje página 26

Step 20
å
Carefully stand your unit upright.
å
Diagram 1 - Pull the lower wing of the INTERLOCK MECHANISM (34G) forward until it clicks into place.
å
Diagram 2 - To insert the LOCKING DRAWER (H) into your unit, line up the EXTENSION SLIDES on the drawer with the
EXTENSION RAILS on the unit and push the drawer into the unit until it is fully inserted.
å
Diagram 3 -Pull the upper wing of the INTERLOCK MECHANISM (34G) forward until it clicks into place.
å
Diagram 4 - To insert the DRAWER (G) with the DRAWER ACTUATOR into your unit, tip the front of the drawer down and
drop the rollers on the drawer behind the rollers on the unit. Lift the front of the drawer up and slide it into the unit. Repeat
this step to insert the remaining DRAWER (G).
1
3
Page 26
Pull the lower
wing forward until
it clicks into place.
34G
Pull the upper
34G
wing forward until
it clicks into place.
H
G
G
427873
2
The lower drawer
ACTUATOR must
be here.
4
The middle drawer
ACTUATOR must
be here.
www.sauder.com/commercial-office/service