iRobot RVE-Y1 Guia Del Propietario página 8

Care and maintenance
Care and maintenance instructions
To keep your robot running at peak performance, perform the procedures
on the following pages.
EN
There are additional instructional videos in the iRobot Home App.
If you notice the robot picking up less debris from your floor, empty the bin,
clean the filter and clean the brushes.
Part Care frequency
Bin Wash bin as needed
Filter Clean once a week
(twice a week if you have
a pet). Do not wash.
Full Bin Sensor Clean every 2 weeks
Front Caster Wheel Clean every 2 weeks
Edge-Sweeping Clean once a month
Brush and Multi- (twice a month if you
Surface Brushes have a pet)
Sensors and Clean once a month
Charging Contacts
Camera Window Clean and inspect once
a month
Note: iRobot manufactures various replacement parts and assemblies.
If you think you need a replacement part, please contact iRobot Customer
Care for more information.
*Replacement frequency may vary. Parts should be replaced if visible
wear appears.
4 For more information, visit global.irobot.com
Emptying the Bin
1
Replacement
frequency*
Every 2 months
2
Every 12 months
Every 12 months
3
Press bin release
button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.
Cleaning the Filter
1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by tapping
the filter against your rubbish
bin.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important: The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.