Hilti SF 14-A Manual De Instrucciones página 15

5.1.6 Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
5.2 Drill safety warnings
a) Wear ear protectors when impact drilling. Exposure to noise can
cause hearing loss.
b) Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
c) Hold power tools by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden wiring.
Contact with a "live" wire will make exposed metal parts of the tool "live"
and shock the operator.
5.3 Additional safety instructions
5.3.1 Personal safety
a) Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
b) Always hold the power tool securely with both hands on the grips
provided. Keep the grips dry, clean and free from oil and grease.
c) Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
d) Avoid touching rotating parts. Switch the power tool on only after
bringing it into position at the workpiece. Touching rotating parts,
especially rotating insert tools, may lead to injury.
e) Activate the safety lock (forward / reverse switch in the middle
position) before storing or transporting the power tool.
f) The power tool is not intended for use by children, by debilitated
persons or those who have received no instruction or training.
g) Children must be instructed not to play with the power tool.
h) WARNING: Some dust created by grinding, sanding, cutting and
drilling contains chemicals known to cause cancer, birth defects,
infertility or other reproductive harm; or serious and permanent
respiratory or other injury. Some examples of these chemicals are:
lead from lead-based paints, crystalline silica from bricks, concrete
and other masonry products and natural stone, arsenic and chromium
from chemically-treated lumber. Your risk from these exposures varies,
depending on how often you do this type of work. To reduce exposure
Printed: 30.09.2013 | Doc-Nr: PUB / 5071630 / 000 / 02
All manuals and user guides at all-guides.com
en
11