Publicidad
Idiomas disponibles
Idiomas disponibles
System settings
to Important Information for the User (a separate manual).
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
Displaying the "System" setting screen on page 37
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.
●
Brightness:
Adjusts the black intensity. (–24 to +24)
●
Contrast:
Adjusts the contrast. (–24 to +24)
●
Color:
Adjusts the color saturation. (–24 to +24)
●
Hue:
Adjusts the tone of color (which color is emphasized, red or
green). (–24 to +24)
●
Dimmer:
Adjusts the brightness of the display. (+1 to +48)
●
Temperature:
Adjusts the color temperature, resulting in a better white
balance. (–3 to +3)
With some pictures, you cannot adjust Hue and
Color.
When you touch [Rear View], the mode changes
to the selected camera mode. By touching
[Source], [Navi] or [Apps], you can return to the
selected mode.
5 Touch
,
,
,
to adjust.
The adjustments of "Brightness", "Contrast"
and "Dimmer" are stored separately when your
vehicle's headlights are off (daytime) and on
(nighttime).
"Brightness" and "Contrast" are switched auto-
matically depending on whether the vehicle's
headlights are on or off.
"Dimmer" can be changed the setting or the time
to switch it to on or off.
Setting the dimmer on page 38
The picture adjustment may not be available with
some rear view cameras.
The setting contents can be memorized
separately.
< CRD4831-A >
39
version
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 37
2 Touch [System Information].
3 Touch [Firmware Information].
The "Firmware Information" screen appears.
CAUTION
The USB storage device for updating must contain only the
●
correct update file.
Never turn this product off, disconnect the USB storage
●
device while the firmware is being updated.
You can only update the firmware when the vehicle is
●
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3 Connect the USB storage device to this
product.
4 Turn the source off.
Source on the AV source selection screen on page 12
5 Display the "System" setting screen.
Displaying the "System" setting screen on page 37
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
p Follow the on-screen instructions to finish updating the
firmware.
p This product will reset automatically after the firmware
update is completed if the update is successful.
p If an error message appears on the screen, touch the display
and perform the above steps again.
Audio adjustments
Displaying the "Audio" setting
screen
1 Press
.
2 Touch
, and then
.
The "Audio" setting screen appears.
Using fader adjustment
1 Display the "Audio" setting screen.
Displaying the "Audio" setting screen on page 39
2 Touch [Fader].
3 Touch
or
to adjust the front/rear speaker
balance.
p "Front25" to "Rear25" is displayed as the front/rear speaker
balance moves from the front to rear.
p The default setting is "F/R 0".
p Set "Front" and "Rear" to "0" when using a dual speaker
system.
You can also set the fader/balance by dragging
the point on the displayed table.
Using balance adjustment
p This function is available when "Standard Mode" is selected
as the speaker mode.
1 Display the "Audio" setting screen.
Displaying the "Audio" setting screen on page 39
2 Touch [Balance].
3 Touch
or
to adjust the left/right speaker
balance.
p "Left25" to "Right25" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "L/R 0".
You can also set the fader/balance by dragging
the point on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
39
Publicidad
