Publicidad
Idiomas disponibles
Idiomas disponibles
Basic operation
Opening and closing the LCD
panel
The LCD panel will open or close automatically when the ignition
switch is turned on or off. You can turn off the automatic close/
open function.
Do not close the LCD panel by force with your hands. That
●
will cause a malfunction.
The automatic close/open function will operate the display
●
as follows.
— When the ignition switch is turned OFF while the LCD
panel is opened, the LCD panel will close after six
seconds.
— When the ignition switch is turned ON again (or turned to
ACC), the LCD panel will open automatically.
— Removing or attaching the front panel will automatically
close or open the LCD panel.
Protecting your unit from theft on page 6
When the ignition switch is turned OFF after the LCD panel
●
has been closed, turning the ignition switch ON again (or
turning it to ACC) will not open the LCD panel. In this case,
press OPEN/CLOSE to open the LCD panel.
When closing the LCD panel, check to make sure that it has
●
closed completely. If the LCD panel has stopped halfway,
leaving it like this could result in damage.
Press OPEN/CLOSE to open the LCD panel.
To close the LCD panel, press OPEN/CLOSE again.
Setting the automatic open function
To prevent the display from hitting the shift lever of an automatic
vehicle when it is in the P (park) position, or when you do not
wish the display to open/close automatically, you can set the
automatic open function to manual mode.
1 Display the "System" setting screen.
2 Touch [Auto Flap].
On (default): The LCD panel will open or close automatically
●
when the ignition switch is turned on or off.
Off: You have to press OPEN/CLOSE to open/close the LCD
●
panel.
< CRD4831-A >
9
Turning the LCD panel
horizontally
When the LCD panel is upright and hinders the operation of the
air conditioner, the panel can be turned horizontally temporarily.
1 Press and hold OPEN/CLOSE to display the flap
menu.
2 Touch the flip down temporarily key to flip the
LCD panel down to the horizontal position.
Flips the LCD panel down to the horizontal posi-
tion temporarily.
To return to the original position, press and hold
OPEN/CLOSE.
The LCD panel returns to the original position
automatically, indicated with a beeping sound 10
seconds after operation.
Adjusting the LCD panel slide
position
You can adjust the LCD panel slide position so that the panel is
set back or forward.
1 Press and hold OPEN/CLOSE to display the flap
menu.
2 Touch the slide back key or slide front key to
move the LCD panel back and forth.
The LCD panel slides to the back.
The LCD panel slides to the front.
Adjusting the LCD panel angle
Important
If you can hear the LCD panel knocking against your
●
vehicle's console or dashboard, touch the flip down
temporarily key from the flap menu to temporarily level
the LCD panel.
When adjusting the LCD panel angle, be sure to adjust
●
from the flap menu. Forcibly adjusting the LCD panel by
hand may damage it.
1 Press and hold OPEN/CLOSE to display the flap
menu.
2 Touch the tilt down key or tilt up key to adjust
the LCD panel to an easily viewable angle.
Laying the panel down.
9
Publicidad
