Haier 50UG6550G Manual Del Usuario página 18

Cast TV
Mobile terminal
1. Open GoogleHome on your mobile device and find
the device .
Mobile terminal
2. Select the device, follow the prompts to continue,
when the Mobile terminal and TV display as shown in the
state when the phone connected TV success. Please
confirm the verification code.There will be a process of
rotation waiting in the process, please be patient.
Mobile terminal
3. Choose a location for Chomecast bulit-in TV. This
will help you organize your devices.
Mobile terminal
4. Choose a Wi-Fi network to use to set up Chomecast
bulit-in TV.
All manuals and user guides at all-guides.com
TV side
TV side
TV side
Mobile terminal
5. Chromecast buile-in TV is ready.
Mobile terminal
6. Open the App's Cast icon, and then select the Cast
TV, the connection is successful, click to play the video,
the TV will be able to load the normal playback.
NOTE
The version of the Android device uses Android 5.1 or
above as much as possible. Ios device Make sure Bluetooth
is on before connecting to Cast.
Mobile can not find CAST TV in GoogleHome
Possible reasons are as follows:
1. If it is IOS phone, may be the phone Bluetooth is not
open, please open the phone Bluetooth, re-view the device
list.
2. TV board connected to the wired network, and wired
network with the mobile phone WIFI connected to the
network is not a network, so the phone can not find this
TV device. Please unplug the cable network and restart the
TV device, so that the phone through the WIFI to TV
equipment.
3. TV Wifi module is not working properly or antenna
signal is weak.
The above shows the use of IOS phone for mobile devices,
Android device interface and operating procedures will be
slightly different.
16
TV side
TV side