Publicidad
Idiomas disponibles
Idiomas disponibles
SETTINGS
OSD Language – Select on-screen display OSD
language. You can select English/Français/Español.
Audio Language – Select on-screen display Audio
language. You can select English/Français/Español.
Active Standby Mode Off, then press
choose
ON/OFF.
HDMI EDID –
Press
button to select HDMI EDID,
then press
button to select.
(Optional:Default, 1.4, 2.0 )
Usage Mode –
Press
then press
button to select.
(Optional:Home Mode, Shop Mode )
Over Scan – Extend part of the display past the visible
area of the screen. The resulting picture will "zoom in"
on the image center.
Closed Caption – Adjust the closed captioning settings.
CC Mode – Select closed captioning mode. You can
select:
CC On – Turn on closed captioning.
CC on Mute – Turn on closed captioning when the
sound is muted.
Reset TV
– Reset all settings to the factory defaults.
HDMI CEC –Press OK button to enter CEC Control
submenu.
Audio Only
audio.
All manuals and user guides at all-guides.com
button to
button to select Usage Mode,
TTS
– Press OK button to enter sub-menu：
TTS – Select On or Off.
Rate Support – Select Mid/Fast/Slow.
Pitch – Select Mid/High/Low.
Volume – Select Mid/High/Low.
NOTE
When in shop mode, the following label will show up.
Please refer to the real TV specific picture.
CHANNEL
Air/Cable – Select the signal type.
Air – Set the signal type to antenna. When set to Air,
the TV can receive analog and digital (ATSC)
broadcasting signals.
Cable – Set the signal type to cable. When set to
Cable, the TV can receive analog and QAM
broadcasting signals.
Auto Scan – Press OK to start the auto channel scan.
ATV Manual Tuning – Press OK to start the ATV
Manual Tuning.
DTV Manual Tuning – Press
Manual Tuning.
Programme Edit – Press
editing programs, press OK to enter the sub-menu.
13
OK to start the DTV
button to select
Publicidad
