Imetec BELLISSIMA ITALIA S3001 Instrucciones De Uso página 18

EN
• Clean the surface of the heating plates (1/2) and the handle with
a soft, damp cloth. The cloth (11) found inside the pack can be
used to clean the plates once they are cold.
Problem
The LEDs on the flash
alternately
The plate doesn't
warm up
The case (9) inside the package can be used to store the
straightener when not in use.
If you do not use the appliance for a long time:
• Clean the appliance as described in the "Cleaning" chapter.
• Store the appliance in a dry and clean place.
The packaging of the appliance is made of recyclable materials.
Dispose of it in accordance with the environmental protection
regulations.
WARNING! Wait for the heating plates
(1/2) to cool down.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
TROUBLESHOOTING
Auto-off mode
The supply cable is
not connected to the
mains.
The on/off button
was not switched on
correctly.
STORAGE
WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
WARNING! DO NOT wrap the supply
cord around the appliance.
DISPOSAL
Cause
16
Solution
To reactivate the plate,
press the on/off button.
Connect the cable to the
power supply.
Press the on/off button.
If the problem persists,
contact an authorised
service centre.