turbionaire TREND PLUS Manual De Instrucciones página 11

4. The units mounted in the ceiling must discharge the air outdoors, not in the space between the
false ceiling and the ceiling itself, using a flexible pipe and the corresponding anti-return valve.
NOTE: If the unit is mounted on the piping (not included), it is necessary to install this piping in
such a way as to avoid the entry of gases from gas-burning appliances or other fuel-burning
appliances into the room.
3. ELECTRICAL WIRING
The fan is double insulated (class II) and
does not need to be earthed.
L – phase
N – neutral
The connectors are located on the fan base
to ensure the degree of protection (IP)
against water splashes. The fan is
permanently supplied with voltage by
means of a 2 conductor-cable of min 1 mm
section each.
L
N
Fan internal
connection
N
L N
Electrical
connection
diagram
without light
Power Supply
Terminal
L
block
PCB
Electrical
connection
M
diagram
with light
L
Power Supply
N
Fan internal
connection
Terminal
L
N
block
L N
PCB
M
9
11