turbionaire TREND PLUS Manual De Instrucciones página 15

SETTING TIME FOR BOOST MODE
1. Press the BOOST key and hold for at least 5 seconds, when the LED indicator flashes GREEN, press the buttons
2. to adjust the BOOST mode (setting intervals: 1, 3, 5, 10, 20, 30 minutes);
3. LED indicator: Flashing PURPLE with each press. When the BOOST Mode is set either to 1 minute (by pressing the Low Speed key
to 30 min (by pressing the Hi Speed key
5. DEVICE STATUS LIST
LED DESCRIPTION
Static RED
Static BLUE
Static GREEN
Flashing YELLOW
Short Flashing PURPLE
Short Flashing BLUE
Flashing YELLOW
), the LED indicator will be flashing YELLOW
STATUS
Unit OFF
Unit ON
Continuous Ventilation
BOOST MODE
Min/Max SPEED
Speed Setting
TIMER Mode
) or
PERFORMANCE CHART
Air flow ( m³/h)
15