turbionaire TREND PLUS Manual De Instrucciones página 12

4. REMOTE CONTROL DESCRIPTION AND ACTIVATION
The remote control is a radio transmitter designed to control the unit. Remove the
transparent pull tab from the remote-control battery compartment. Since then, the
remote control is activated and operates within a range of approximately 20 m (battery
in a good functioning state).
A. REMOTE CONTROL PAIRING TO THE VENTILATION UNIT
Press the "RESET" button on the device to be connected to the remote control, for at least 5 seconds. When the LED flashes BLUE,
synchronisation mode has begun. To confirm the pairing, press any button on the remote control (except the "ON/OFF" key). The pairing is
complete.
B. UNPAIRING REMOTE CONTROL FROM THE VENTILATION UNIT
Press the "RESET" button on the device to be disconnected from the remote control, for at least 5 seconds. When the LED flashes BLUE,
synchronisation mode has begun. To unpair, press any button on the remote control (except the "ON/OFF" key). The cancellation of the
pairing is complete.
C. PAIRING A REMOTE CONTROL WITH SEVERAL VENTILATION UNITS
It is possible to control several ventilation units (without the upper limit for the associated devices in the range of the remote control). In this
case, all the remote control functions will work on all the ventilation units.
12