Hilti SID 2-A Manual De Instrucciones Original página 27

compare one power tool with another.
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However,
if the power tool is used for different applications, with different accessory
tools, or is poorly maintained, the data can vary. This can significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times
when the tool is switched off, or when it is running but not actually being used
for a job. This can significantly reduce exposure over the total working period.
Identify additional safety measures to protect the operator from the effects
of noise and/or vibration, for example: maintaining the power tool and
accessory tools, keeping the hands warm, organization of work patterns.
Noise information
Sound pressure level, L
Sound power level, L
Uncertainty for sound level, K
Vibration information
Impact driving of fasteners of maximum size, a
Uncertainty for tightening screws/bolts and nuts of
the maximum permitted size
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.
5.2 Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out of its holder in the device.
5.3 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
*2081236*
Printed: 10.07.2019 | Doc-Nr: PUB / 5206085 / 000 / 04
pA
WA
2081236
They can also be used for a
103 dB
92 dB
3 dB
16.5 m/s²
h
1.5 m/s²
English 23