STOR.E TV
System Firmware Upgrade
The Firmware is the program that internally controls STOR.E TV (media
files playback, user interface, configuration). You may need to upgrade
your firmware to improve your experience with new features or to fix some
issues.
Make sure that the power adapter of STOR.E TV is always connected
IMPORTANT
and do not remove the USB key during the firmware upgrade. A power
cut or removing the USB key during the update process can corrupt the
system and your STOR.E TV may not work any more. Please make
sure that the video resolution is set to "Standard" before starting the
firmware update (Please refer to the chapter "Video Resolution" on
page 23 in this manual).
The USB key is the most convenient solution to upgrade your firmware.
You can also copy the firmware directly on the STOR.E TV hard drive
through your PC connection and upgrade from STOR.E TV.
To update the firmware:
1. Go to computers.toshiba.eu/options-support. and go in the "Manuals
and Drivers" section.
2. Click "Download Firmware" then select Product Type = "Options",
Family = "Drive Devices", Product Series = "HDD & HDD adapters",
Model = "STOR.E TV".
3. Download the latest firmware and copy the *.ROM file to a USB key.
4. Make sure that STOR.E TV is OFF. Connect the USB drive to
STOR.E TV USB port and turn STOR.E TV ON.
5. With your remote control, enter the USB menu, select the firmware
update file (*.ROM file).
6. You are prompted to perform the firmware upgrade. Press ENTER to
start the upgrade.
EN-28
User's Manual