ELECTRIC CONNECTION
Before plugging the washer into the mains
socket, make sure that:
• The socket is earthed and in compliance
with the applicable law.
• The socket is able to sustain the
appliance's maximum power load indicated
on the Technical Date Plate fixed on the
machine.
• The supply voltage is included within the
values indicated on the Technical Date
Plate fixed on the washer.
• When heating, the maximum current of the
washer is 10A, so please make sure that
the power supply system (voltage, current
and the cable) is applicable to the load of
the applied appliance.
• The socket is compatible with the washer's
plug. If this is not the case, replace the
socket or the plug by a qualified electrician.
WARNING - THIS APPLIANCE MUST BE
EARTHED.
OPERATIONS SHOULD BE CARRIED OUT
BY A QUALIFIED ELECTRICIAN.
Replace the supply cable:
If the supply cord is damaged, it must be
replaced with an identical one by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard –
risk of electric shock.
Disposing of the plug:
Ensure that before disposing of the plug itself,
you make the pins unusable so that it cannot
be accidentally inserted into a socket.
Disposing of the appliance:
When disposing of the washer please remove
the plug by cutting the mains cable as close as
possible to the plug body and dispose of the
plug as described above.
THE
FOLLOWING
• The appliance is not intended to be
operated
switching device, such as a timer, or
separate remote-controlled system.
• When the appliance is installed, the mains
socket must be within easy reach.
• Do not use extension cables, multiple
sockets or adapters.
• To remove the plug from the socket, grasp
the plug firmly and pull it out. Do not pull at
the cable.
• The electrical components must not be
accessible to the user after installation.
• Do not connect the machine to electrical
outlets while your hands are wet or damp.
• Do not operate this appliance when you are
wet or barefoot.
• Do not operate this appliance if it has a
damaged power cable or plug, if it is not
working properly, or if it has been damaged
or dropped.
• WARNING! The company denies all
liability if and when these norms are not
respected
TECHNICAL DATE
Model
Rated washing capacity
(kg)
Rated voltage
Rated frequency
Rated power (W)
Washing noise level (dB)
Spinning noise level (dB)
Spin speed (rpm)
Water pressure (MPa)
Degree of waterproof
Net weight (kg)
Outer dimension
(HxWxD mm)
100
by
means
of
an
JLR014085
220~240V
50Hz
2000
1400
0.03 ~ 1.0
IPX4
850 X 600 X 580
external
9
62
76
65