Publicidad
Idiomas disponibles
Idiomas disponibles
Pause a running program and open the
door, if needed
Press START/PAUSE
running program.
If the water level and/or temperature in the
drum are/is not high, the DOOR LOCK
indicator light
turns off. You can open the
door, for example to add more laundry, or to
remove laundry which was loaded by mistake.
Press START/PAUSE
proceed with the program.
9. Cancelling a running program, if needed
• Turn the wash cycle selector knob to switch
the machine off while the light under the
symbol " " is lit.
• If the water level and/or temperature are/is
low enough, the door is unlocked and can
be opened.
• The door remains locked if there is higher
water level in the drum. To unlock the door,
firstly turn the wash cycle selector knob to
select the Spin program, then turn the spin
option off by pressing the SPEED button to
set the spin speed to "－－" shown on the
digital display.
• Press START/PAUSE
Spin program. The water is pumped out
from the drum during the cycle. The door
unlocks at the end of the program.
10. Switch off the appliance after program
End
• At the end of the cycle, the message "End"
is shown on the digital display.
• The door can only be opened when the
DOOR LOCK indicator light
• Check that the DOOR LOCK indicator light
is off, then open the door and take out
the laundry.
• Turn the wash cycle selector knob to switch
the machine off while the light under the
symbol " " goes out.
Leave the door ajar to let the interior of the
appliance to dry.
button to pause a
button again to
button to run
goes out.
112
Publicidad
