WARNING:
Always remove battery pack from your product when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent acci-
dental starting that could cause serious personal injury.
PACKING LIST
ONE+ 18V Submersible Pump
Removable base
3/4" Garden hose adaptor
Clip Hook
Wall Mount Hook
Operator's Manual
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Keep water discharge pointed away from all electrical
devices to reduce the risk of electrocution or electric
shock.
WARNING:
Ensure all hose connections are secure before using the
pump. Spilled water and leaks can result in a slippery
surface and create a slip and fall hazard.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
ASSEMBLY
INSTALL THE DISCHARGE ELBOW AND
HOSE
See Figures 2 - 3.
Install the discharge elbow into the submersible pump.
Insert the locking pin to secure the discharge elbow.
Attach a garden hose to the threaded outlet on the dis-
charge elbow. Tighten to secure the hose.
MOUNTING THE CONTROLLER BOX
See Figures 4 - 5.
Install the wall mount hook onto the wall.
Turn the screws clockwise to tighten and secure the wall
mount hook.
Mount the controller box onto the wall mount hook.
NOTE: The controller box has a groove behind it where
the wall mount hook can be hooked into.
Insert the clip hook into the groove behind the controller
box. Press the clip hook and clip onto a stable support.
OPERATION
WARNING:
Always remove battery pack from your product when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent acci-
dental starting that could cause serious personal injury.
APPLICATIONS
You may use this tool for the purpose listed below:
Drain or remove water out of ponds, pools, or tanks.
Drain flood water or control excess rainwater during
floods.
The product is intended only for home or domestic use. The
product may be used indoors or outdoors.
Do not use the product for any other purpose.
INSTALLING/REMOVING BATTERY PACK
See Figures 6 - 7.
Make sure the pump is turned off.
Open the battery cover on the controller box by releasing
the latch and opening the cover.
Insert the battery pack into the product as shown.
Make sure the latch on the side of the battery pack snaps
into place and the battery pack is secured in the product
before beginning operation.
Close the battery cover and fasten the latch to secure
the cover.
6 – English