Technical Specification
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our
products, we may change specifications and designs without prior notice.
Zhongshan Youlong Kitchen Appliances Co., Ltd
Add.:Building B, E and part 3 of Building F, No. 103, Sanxin Road, Sanjiao, Zhongshan,
Guangdong, P. R. China
Contact:Emily
Tel: +1(838)910 8317
EC
REP
WEEE-Reg.-Nr. DE 50223502
LUCID-Reg.-Nr.DE4120551716513
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved around
the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
work surface material to avoid larger deformation caused by the heat radiation from the
hotplate. As shown below:
The device meets the requirements of Regulation 2014/35/EU as
well as the applicable standards EN 60335-1:2012+A11:2014+
A13:2017+A1:2019+A2:2019+A14:2019,EN
62233:2008
Name:APEX CE SPECIALISTS LIMITED
Add.:UNIT 3D NORTH POINT HOUSE,NORTH POINT BUSINESS
PARK,NEW MALLOW ROAD,CORK,T23 AT2P,IRELAND
Contact:Wells Tel:+353212066339 E-Mail:info@apex-ce.com
YL-IF7018S-5B5B3B1B
4 Zones
220-240V~, 50-60Hz
6600-7400W
590X520X60
563X493
E-Mail:info@iamzchef.com
151
60335-2-6:2015,EN