1.4/ Set time of the day to start watering
Repeat above procedure;
Note: It is not necessary to use all 8 start times. The controller will
automatically file your start times in chronological order from 00:00
to 23:59.
To cancel a start time : Press the
times. When you see the start time you want to cancel, press the
or
keys until you see this screen (between 11 :59 and
12 :00 and between 23 :59 and 00 :00).
Once all start times are set for all your programs, basic programming is complete.
Press the
key to leave the programming menu and move to controller status screen.
You can start a watering cycle up to 8 times per day and per
program if you prefer short watering cycles. Select the desired
program by pressing the
Use the
and
the
key to move to the next start time.
key to display the start
key to set the first start time;
keys to set the first start time. Then press
26