Keenray EL10 Manual De Instrucciones página 7

TROUBLE SHOOTING
Trouble Cause
Too many ingredients
put into the juicer.
The juicer stops
running suddenly
Hard fruits or vegetables
have not been cut in
small pieces.
The juice yield is low The bowl and the silicone
or juice flows out of the valve are not installed
main housing. properly.
Parts cause extrusion
Abnormal noise.
sound during squeezing.
There is too much pulps
inside the bowl.
The chute & strainer
There is hard foods
assembly cannot be
stuck inside.
opened.
The pulp mess is stuck.
The container & Dyed parts are due
accessories are to natural color of
dyed after use. specific fruits/veggies.
Solutions
Switch to "R" position
instantly to make the
ingredients return
upwards. If the machine
still stops running,
please clean the
machine before use.
Hard fruits and vegetables
(such as carrot) shall be
cut into thin strips or
small cubes before
putting into chute.
Please re-install the bowl
silicone valve by
referring to the
installation method.
The sound is caused by
extrusion of fruits and
vegetables, which is
normal phenomenon.
Press switch to "R" setting
to eject the pulps backward.
Press switch to "R" to eject
the object backward.
Pour water into the
chute to soften the
stuck pulp mess overnight.
This is natural color
and unavoidable.
11