Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
― ―
1.
Place the heater upright on a flat, steady and heat-resistant surface.
2.
Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is 'O' OFF.
3.
Insert the plug into a suitable socket.
4.
Turn the power switch dial clockwise to the desired power:
•
'•' - Low Heat
•
'• •' - Medium Heat
•
'• • •' - High Heat
5.
Turn the thermostat dial clockwise until you hear a click and the light turns on. The position
of the click indicates the temperature of the room. Turning the thermostat clockwise
will keep the radiator on until the room gets warmer. Turning it anti-clockwise will turn
it off until the room has cooled to a lower temperature and then it will switch on. The
radiator automatically rotates through an on-and-off cycle to maintain the current room
temperature according to the thermostat's setting. It is normal for it to heat up and cool
down periodically.
6.
To turn off the heater, turn the power switch dial anti-clockwise to "O" OFF.
7.
Unplug the heater from the electrical outlet when it is left unattended or is not in use.
Note: It is normal for the radiator to make crackling noises when first turned on.
TIMER FUNCTION
― ―
Timer
Triangluar Point
Segments
(Figure 1)
The heater can be set to turn ON and OFF at specific times of the day. There are 96 segments
around the dial. Each of these segments represent a 15-minute time period.
8 of 80 | English
Current Time 8:00AM
8 Segments Outwards
(Figure 2)
Setting the Timer
Note: When you first use the heater, all the segments should point outwards. (See Figure 1)
Note: Do not turn the dial anti-clockwise.
1.
Plug the heater in.
2.
Set the power and temperature to the desired settings.
3.
The triangular point will stay fixed, turn the dial clockwise around it so that the triangular
point is pointing at the current time of day.
4.
Push the segments inwards for the time period you want the heater to be turned on (See
Figure 2)
5.
The heater will now cycle on and off according to these settings.
6.
Once unplugged, the heater timer will stop and need to be reset.
CLEANING AND STORAGE
- -
WARNING: ALWAYS TURN THE HEATER OFF, UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET AND
ALLOW THE HEATER TO COMPLETELY COOL DOWN BEFORE
HANDLING OR CLEANING IT.
WARNING: ALLOW THE HEATER TO COOL DOWN FOR 2
HOURS (120 MINUTES) BEFORE CLEANING.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE YOUR HEATER.
•
Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
•
Clean the exterior surface of the heater by wiping it with
a soft, damp cloth. Dry the heater with a soft, clean cloth.
•
Clean the vent and openings of the appliance regularly
with a vacuum cleaner, using the brush attachment to
avoid any dust build-up.
•
To store your heater, we recommend using the original or
a similar-sized box.
•
Do not kink or wrap the power cord and plug around the
English | 9 of 80
Publicidad
