Srhythm NiceComfort 95 Manual De Usuario página 4

How to Use
Use ANC Function
To turn on ANC, press the ANC Button when Bluetooth turned
on; Long press 3 seconds the ANC Button when Bluetooth
turned off;
(the LED indicator light will be green when ANC ON)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when ANC OFF)
Use Transparency Function
Press the ANC button to switch between ANC mode, Normal
mode and Transparency mode.
Use Bluetooth Function
1.Hold the Multi-function Button for 3-5 seconds to turn
headphone Bluetooth on,then enter pairing mode.(the LED
indicator light will be blue and red flashing quickly.)
2.Start your mobile phone Bluetooth and find headphone
Bluetooth pairing name "Srhythm NC95" to click it to
pair.(the LED indicator light will be blue flashing slowly after
paired successfully.)
3.Hold the Multi-function Button for 3-5 seconds to turn
headphone Bluetooth off.
3‑5S Note꞉ If NC95 is not paired with any devices within 5 minutes
after Bluetooth turned on, it will automatically shut down to
save power .
Adjust the volume by rotating the multifunction button
clockwise or counterclockwise.
Press the Multi-function Button to play/pause music or
answer/end call.
Previous song꞉ press three times. Next song꞉ press twice.
5
Double-press the Multi-function Button to reject an
incoming call.
Press the Multi-function Button 4 times to activate voice
assistant.
Function Details
Easy Pairing
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter pairing
mode.(the LED indicator light will be blue and red
flashing quickly.)
2. Keep headphone and your mobile phone as close as
possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click "Srhythm NC95" to pair.(the LED indicator light
will be blue flashing slowly after pairing successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
Step 1꞉Pair NC95 with First device via Bluetooth
successfully and then turn off the First device's
Bluetooth.
Step 2꞉Pair NC95 with the Second device via
Bluetooth.
Step 3꞉ Turn on Bluetooth of the first device and pair it
with headphone again.
Now both of your devices are paired with NC95 for
easy switching.
6