Anker Solix Serie Manual De Instalación página 28

Then, secure the U-shaped racks with stainless steel hose clamps.
Hold the solar panel until the U-shaped racks are firmly secured with stainless steel hose clamps.
Pressing the U-shaped racks too often may cause the paint surface to crack.
·
Tighten the stainless steel hose clamps clockwise, and loosen the stainless steel hose clamps
counterclockwise.
T
·
At least 2 stainless steel hose clamps are needed to secure the brackets on one side.
K x2
304 Stainless Steel Hose Clamp
8. Install the solar panel's support brackets on the balcony railing, then secure them using fastening clamps and stainless
steel hose clamps.
G x4 J x4
E x4
Fastening Clamp
M6×100 Hexagon Flange Bolt M6 Flange Nut
9. Install the microinverter to the balcony railing with stainless steel hose clamps.
Note: The microinverter's front surface (with the Anker logo) should face outwards.
K x2
304 roestvaststalen slangklem
Check if all screws are tightened and complete the installation.
49 EN
K x2
304 Stainless Steel Hose Clamp
10. Repeat the steps above to install another solar panel.
11. Connect the solar panel and the microinverter with the solar panel extension cables.
Note:
1. Ensure that two solar panels have been installed before this step.
2. This step must be done while there is enough sunlight for the solar panel to provide power to the microinverter.
12. Turn on Bluetooth on your phone.
13. Download the app, and follow the in-app instructions to finish the microinverter configuration and Schuko cable connection,
Then you can connect the microinverter to your home grid via the Schuko cable.
Auto Mode:
① Scan the QR code or search "Anker" on the App Store, Google Play, or other official app stores to download the app.
② Sign up/log in to your Anker account.
EN 50