Honda FES125/A S-wing Manual Del Propietário página 108

3. Disconnect the spark plug cap (4) from
the spark plugs.
4. Clean any dirt from around the spark
plug bases.
Remove the spark plug using the spark
plug wrench (5) furnished in the tool kit.
5. Discard the spark plug.
(4)
(4) Spark plug cap
Spark plug wrench
(5)
6. Check the new spark plug gap (6) using a
7. With the plug washer attached, thread
(5)
(6) Spark plug gap
(7) Side electrode
wire-type feeler gauge. If adjustment is
necessary, bend the side electrode (7)
carefully.
The gap should be:
0,80 - 0,90 mm (0.031 - 0.035 in)
Make sure the plug washer is in good
condition.
the spark plug in by hand to prevent
cross-threading.
(7)
(6)
97