Honda FES125/A S-wing Manual Del Propietário página 131

Finishing Touches
After washing your scooter, consider using a
commercially available spray cleaner/polish
or quality liquid or paste wax to finish the
job. Use only a non-abrasive polish or wax
made specifically for motorcycles or
automobiles. Apply the polish or wax
according to the instructions on the
container.
120
Removing Road Salt
The salt contained in the road surface
freezing prevention medicine which a road
was sprayed with in winter, and the
seawater becomes the cause which rust
occurs in.
Wash your scooter by the following point
after it runs through such a place:
1. Clean the scooter using cool water (page
118).
Do not use warm water.
This worsens the effect of the salt.
2. Dry the scooter and protect the surface
of the metal with wax.