Honda FES125/A S-wing Manual Del Propietário página 65

HELMET HOLDER
The helmet holder eliminates the need for
carrying your helmet after parking your
scooter. The helmet holder is located below
the seat.
Open the seat (page 53).
Route either end of the helmet holder cable
(1) through the helmet's D-ring (2).
Hook the loops of the wire onto the helmet
holder (3) and lower the seat to lock.
The helmet holder wire is furnished in the
tool kit.Remove the helmet wire and store it
in the tool bag when it is not used.
n WARNING
Riding with a helmet attached to the holder
can interfere with the rear wheel or the
suspension and could cause a crash in
which you can be seriously hurt or killed.
Use the helmet holder only while parked. Do
not ride with a helmet secured by the holder.
54
(3)
(2)
(1) Helmet holder cable
(2) D-ring
(3) Helmet holder
(1)