Digital Clock (1)
Shows hour and minute. To adjust the time,
proceed as follows:
1. Turn the ignition switch ON.
2. Press and hold the MODE button (2) and
RESET button (3) for more than 2
seconds. The clock will be set in the
adjust mode with the hour display
flashing.
(1)
(3)
(2)
(1) Digital clock
(2) MODE button
(3) RESET button
3. To set the hour, press the RESET button
until the desired hour and AM/PM are
displayed.
• The time is advanced by one hour,
each time the button is pushed.
• Quick setting - press and hold the
RESET button until the desired hour
appears.
23