Publicidad
Idiomas disponibles
Idiomas disponibles
Drawer replacement
CAUTION
Check that the drawer is inserted properly into the rail during assembly.
To remove the drawer
To reattach the drawers
Reattaching the drawers follows the reverse order of their respective removal steps.
Hinge replacement
To replace the hinges, you must remove the doors first.
CAUTION
• When removing the doors, take extreme caution because the doors are heavy.
• Before replacing the hinges, put a soft pad such as cardboard on the floor to prevent
scratches on the door when you place the doors down.
• As the hinges must be handled carefully and replaced by two or more persons, we
recommend you to call for professional technical service.
• If you remove the hinge without holding the door, the door may fall and cause injury.
• Ensure that the shaft is firmly tightened on the hinge.
• Check that the hinge is firmly attached to the cabinet.
• Make sure the wire connectors are connected properly.
• Be careful not to damage the wires when fastening the top cover.
WARNING
• Tilting/laying the refrigerator requires a minimum of 2 people.
• Disconnect the power cord before reversing the doors.
RB7000R&8000R_User-servicing-manual.indb 4
Pull the drawers out fully then slightly lift it
up to remove the drawers.
• If the drawers get stuck to door, remove
drawer by lifting up after remove shelves.
Moving the drawers, please grab the handle
of drawer tightly.
CAUTION
If you dropped the drawer during moving it,
you will be able to have injury.
English
2020-12-21
4:58:33
Publicidad
