Maytag Commercial MAT24PD Instrucciones página 18

CODE
A.00 VAULT VIEWING OPTION*
This option is either SELECTED "ON" or NOT SELECTED "OFF."
A.00 Not Selected "OFF."
A.SC Selected "ON." Press the DELICATES keypad once for this selection.
When selected, the money and/or cycle counts will be viewable
(depending on what is selected) when the coin box is removed.
g Press the NORMAL keypad once to advance to next code.
b.05 VALUE OF COIN 1*
b.05 This represents the value of coin 1 in number of $0.05 increments
of the larger coin value. 5 x $0.05 = $0.25.
By pressing the POWERWASH or TEMPERATURE Keypad, there is
the option of 1-199 for the quantity of $0.05 increments.
g Press the NORMAL keypad once to advance to next code.
VALUE OF COIN 2*
C.20
C.20 This represents the value of coin 2 in number of $0.05 increments
of the larger coin value. 20 x $0.05 = $1.00.
PR MODELS ONLY: Factory preset for $0.25.
By pressing the POWERWASH or TEMPERATURE Keypad, there is
the option of 1-199 for the quantity of $0.05 increments.
g Press the NORMAL keypad once to advance to next code.
d.00 COIN SLIDE OPTION
This option is either SELECTED "ON" or NOT SELECTED "OFF."
d.00 Not Selected "OFF."
d.CS Selected 'ON'. Press the DELICATES Keypad 3 consecutive times
for this selection.
When coin slide mode is selected, set 'b.' equal to value of slide
in $0.05 increments. Set step 6 (regular cycle price) and step 3
(special cycle price) to number of slide operations. If the installer
sets up 'CS' on a coin drop model, it will not register coins.
g Press the NORMAL keypad once to advance to next code.
ADD COINS OPTION*
E.00
This option is either SELECTED "ON" or NOT SELECTED "OFF."
This option causes the customer display to show the number
of coins (coin 1) to enter, rather than the monetary amount.
E.00 Not Selected "OFF."
E.AC Selected "ON." Press the DELICATES keypad three consecutive
times for this selection.
g Press the NORMAL keypad once to advance to next code.
H.00 COLD Temperature Upgrade* - Represents the amount of Coins
COLD or Debit pulses required to purchase the Cold Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 0.
g Press the NORMAL keypad once to advance to next code.
H.00 COOL Temperature Upgrade* - Represents the amount of Coins
COOL or Debit pulses required to purchase the Cool Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 0.
g Press the NORMAL keypad once to advance to next code.
H.00 WARM Temperature Upgrade* - Represents the amount of Coins
WARM or Debit pulses required to purchase the Warm Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 0.
g Press the NORMAL keypad once to advance to next code.
H.00 HOT Temperature Upgrade* - Represents the amount of Coins
HOT or Debit pulses required to purchase the Hot Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 1 on PD
models and set for 0 on PR models.
g Press the NORMAL keypad once to advance to next code.
18
EXPLANATION CODE
H.00 HEAVY SOIL Upgrade* - Represents the amount of Coins or Debit
HEAVY pulses required to purchase the Heavy Soil Upgrade. Adjustable
between 0 and 40. Factory default is set for 1 on PD models and
set for 0 on PR models.
g Press the NORMAL keypad once to advance to next code.
H.00 EXTRA RINSE Upgrade* - Represents the amount of Coins or
EXTRA Debit pulses required to purchase the Extra Rinse Upgrade.
RINSE Adjustable between 0 and 40. Factory default is set for 1 on PD
models and set for 0 on PR models.
g Press the NORMAL keypad once to advance to next code.
COIN/DEBIT OPTION*
J.Cd
J.Cd Both coin and debit selected.
J.C_ Coins selected, debit disabled. Press the DELICATES keypad
three times for this selection.
J._d Debit Card selected, coins disabled. Press the DELICATES
keypad three times for this selection.
J.Ed Enhanced Debit is self-selected when a Generation 2 card reader
is installed in the washer. The Ed option cannot be manually
selected or deselected.
g Press the NORMAL keypad once to advance to next code.
L.00 PRICE SUPPRESSION OPTION*
This option causes the customer display to show "ADD"
or "AVAILABLE" rather than the amount of money to add.
(Used mainly in debit installations.)
L.00 Not Selected "OFF."
L.PS Selected "ON." Press the DELICATES keypad once for this
selection.
g Press the NORMAL kepad once to advance to next code.
CLEAR ESCROW OPTION*
n. CE
When selected, money held in escrow for 30 minutes without
further escrow or cycle activity will be cleared.
n. CE Selected "ON."
n. 00 Not selected "OFF." Press the DELICATES keypad once to
deselect this selection.
g Press the NORMAL keypad once to advance to next code.
A3.03 NORMAL Cycle Settings*. Allows the owner to select the cycle
default options of Water Temperature, Soil Level, and Extra Rinse.
See Table 1 for specific settings. Normal is set to 03 from the
factory.
g Press the NORMAL keypad once to advance to next code.
A4.01 DELICATES Cycle Settings*. Allows the owner to select the cycle
default options of Water Temperature, Soil Level, and Extra Rinse.
See Table 1 for specific settings. Delicates is set to 01 from the
factory.
g Press the NORMAL keypad once to advance to next code.
A5.1C POWERWASH Cycle Settings*. Allows the owner to select the
cycle default options of Water Temperature, Soil Level, and Extra
Rinse.
See Table 1 for specific settings. Powerwash is set to 1C from the
factory.
g Press the NORMAL keypad once to advance to next code.
A6.03 NORMAL ECO Cycle Settings*. Allows the owner to select the
cycle default options of Water Temperature, Soil Level, and Extra
Rinse.
See Table 1 for specific settings. Normal Eco is set to 03 from the
factory.
g Press the NORMAL keypad once to advance to next code.
EXPLANATION