Bartscher 1K2200 GL Manual Del Usuario página 30


After the set temperature is reached, the red control light will be off. When the plate
has cooled down, the appliance will start re-heating and the control light appear
again. This function prevents overheating of the electric hot plate.

There is the "Timer" with the time control knob. To activate it, press the knob twice.
This initiates the 30-minute timer function.

You can set the time between 1 and 99 minutes (with 1-minute steps).

The appliance will switch itself off after the set time has elapsed.
HOT SURFACE! Risk of burns!
The outer surface of the appliance becomes very hot
during operation. Do not touch the hot surface with bare
hands!
WARNING!
The appliance is not designed for cooking or maintaining the temperature of
warm dishes directly on the plate. Use the appropriate cookware!

Fill up the appropriate cookware with a desired dish and place it on the heating plate.

Before you put the dish on the heating plate, make sure that it has been positioned
on a flat and steady surface to prevent it from sliding or overturning.

When the appliance is not in use, switch it off using the on/off switch and disconnect
it from the mains (unplug!).

Before you move the appliance to a different place, make sure the electric hot plate
has cooled down completely.
- 26 -