Publicidad
Idiomas disponibles
Idiomas disponibles
6. Steps before starting:
6.1 Engine oil filling.
Check if the compressor is on a perfectly flat surface and levelled, to avoid an error in the
oil level reading. Remove the cap with oil level and put the oil into the engine through the
hole, until reach (without exceeding) the upper limit of the level (see the figure below).
The estimated amount of oil to reach a correct level changes according to the model:
CIERZO:
TRAMONTANA: 1.1L
MISTRAL:
Use good quality four-stroke engine oil SAE10W30 or SAE10W40. Recommended oil
classification must be API "SJ" (USA) or ACEA "A3" (EUROPA) or more updated (See
container specifications).
NOTE: The engine may consume a bit of oil during its running. Therefore, before
each usage, always check oil level and refill if necessary.
NOTE: Never use oils that are old, dirty, in poor condition or without specifications
(grade and quality). Do not mix different types of oils.
0.6L
1.1L
47
Publicidad
