GENERGY CIERZO Instrucciones De Uso página 50

6.2 Compressor oil filling.
Check if the compressor is on a perfectly flat surface and levelled, to avoid an error in the
oil level reading. Remove the oil cap (A) and put the oil through the hole, until it reaches
the middle of the oil level indicator (B) (see the figure below).
Use specific oil for piston compressor: ISO-VG-100 or SAE30. The amount of oil changes
according to the compressor model:

CIERZO:

TRAMONTANA: 0.9L

MISTRAL:
NOTE: The compressor may consume a bit of oil during its running. Therefore,
before each usage, always check oil level and refill if necessary.
NOTE: Never use oils that are old, dirty, in poor condition or without specifications
(grade and quality). Do not mix different types of oils.
0.6L
1.0L
48