Thermo Scientific Orion Star Manual Del Usuario página 10

Display
Measurement Unit cons
In the measurement mode, the arrow icon on the left side of the display screen
indicates the active line . Press
press /
selected line . The measurement unit icons for the 5-Star multi-parameter meter are
shown below . The single and dual parameter meters will have fewer measurement
lines and icons, depending on the meter capabilities .
The units of measurement, which are displayed on the right side of the screen, will
flash until the reading is stable .
Note: If a measurement line is not needed, press
icon to the measurement line that is not needed and press
measurement line is completely blank.
EN-4
to scroll through the measurement unit icons associated with the
A
B
C
Thermo Scientific Orion Star
to move the arrow icon to the desired line and
pH, mV, relative mV, ISE,
or temperature
Conductivity, TDS, salinity, resistivity,
or temperature
Dissolved oxygen as % saturation,
dissolved oxygen as concentration,
barometric pressure or temperature
and Star Plus Series Meter User Guide
™
to move the arrow
/ until the