Descargar Imprimir esta página

Datalog Deletion Setting - Thermo Scientific Orion Star Manual Del Usuario

Ocultar thumbs Ver también para Orion Star:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Data Archival and Retrieval

Datalog Deletion Setting

The datalog deletion setting determines if the meter will automatically delete
the datalog after it is downloaded to a printer or computer and if the meter will
overwrite the datalog points when the datalog is full . If the datalog deletion setting
is set to
, the meter will automatically delete the datalog after the datalog is
downloaded to a printer or computer . The meter will also display the
error message when all 200 datalog points are filled and the datalog must be
downloaded to a printer or computer to clear the error message . If the datalog
deletion setting is set to
all 200 datalog points are filled and will not delete the datalog after the datalog is
downloaded to a printer or computer .
1 . In the measurement mode, press
2 . Press
/
3 . Press
to accept the selection and move the arrow icon to the middle line
and press
4 . Press
to accept the selection and move the arrow icon to the bottom line
and press
5 . Press
to accept the selection and move the arrow icon to the top line .
6 . Press
to save the setup option and return to measurement mode .
Note: If the datalog is not required, set the datalog deletion setting to
prevent the error 038 (datalog full) message.
EN-48
, the meter will overwrite the oldest datalog point when
until
is displayed on top line .
/
until
/
until
Thermo Scientific Orion Star
.
is displayed .
or
is displayed .
and Star Plus Series Meter User Guide
to

Publicidad

loading

Este manual también es adecuado para:

Star plus