Publicidad
ENGLISH
Step 4: Top of the head
•
Use the longer length fixed combs to cut hair on top of the head against the direction
in which the hair normally grows.
•
Always work from the back of the head.
Step 5: The finishing touches
•
Use the trimmer without a comb for close trimming around the base and sides of the
neck.
•
To produce a clean straight line at the sideburns, place the trimmer at right angles to
the head, tips of the blades lightly touching the skin and then work downwards.
USING THE FOIL SHAVER
•
Fit the foil shaver attachment.
•
Use short, well-controlled linear movements. Use your free hand to stretch your skin.
This encourages the hair to stand upright, making it easier to shave.
•
Note: always trim your facial hair before shaving.
CLEANING AND MAINTENANCE
Care for your appliance to ensure a long lasting performance. We recommend that you clean
it after each use.
AFTER EACH USE
•
Brush any accumulated hairs from the trimmer and attachment heads.
•
The easiest and most hygienic way to clean the trimmer is under the tap.
•
Place one or two drops of oil on the blades. Turn the appliance on to distribute the oil
evenly, wipe off any excess oil.
REPLACING THE FOILS AND CUTTERS
To ensure continued high quality performance from your shaver, we recommend the foils
and cutters are replaced regularly.
Signs that your foils and cutters need replacing
•
Irritation: as foils get worn, you may experience skin irritation.
•
Pulling: as the cutters wear, your shave may not feel as close and you may feel the
cutter pulling your hair.
•
Wear through: you may notice that the cutters have worn through the foils.
TO REPLACE THE FOIL AND CUTTERS
•
Remove the shaver head (pull the head up and off).
•
Fit the new head assembly over the hair pocket and press down to click into place.
8
Publicidad
