Operations Using The On-Screen Bar - JVC KW-ADV792 Manual De Instrucciones

Using the list screens... (DVD-VR)
1
Display the Original Program screen.
Display the Playlist screen.
2
Select an item you want to start play.
Original Program/Playlist screen
• Original Program
• Playlist
1
Original Program/Playlist number
2
Recording date
3
Recording source (TV station, the input terminal of
the recording equipment, etc.)
4
Start time of recording
5
Title of the program/playlist *
6
Highlight bar (current selection)
7
Creating date of playlist
8
Total number of chapters included in the playlist
9
Playback time
* The title of the original program or playlist may not be
displayed depending on the recording equipment.
Operations using the
on-screen bar
(DVD/DVD-VR/MPEG/JPEG/VCD)
These operations are possible on the monitor using the
remote controller.
1
Show the on-screen bar (
(twice)
2
Select an item.
3
Make a selection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.
Entering time/numbers
% fi
Press / to change the number, then press
move to the next entry.
%
• Each time you press /
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
% #
Press once, then twice to go to the third entry,
twice, then press ENT (enter).
Removing the on-screen bar
OPERATIONS
36).
@ #
/
fi
, the number increases/
Continued on the next page
35
to
%