Descargar Imprimir esta página

Parkside Performance PPTSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 33

Sierra de inmersión recargable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 172
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures­over­130 °C­can­cause­
an­explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions. Incorrect charging or charging
outside the permitted temperature
range may destroy the battery and in-
crease­the­risk­of­fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This­will­ensure­that­the­safety­
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Additional instructions
a) Do not use grinding discs.
b) Select the right saw blade based
on the material you will saw.
Saw blades that are intended for cut-
ting wood or similar materials must
comply­with­EN­847-1.­Only­use­the­
saw­for­cutting­wood,­plastic­and­light-
weight materials
c) Only use saw blades with a
speed designation that meets
the specified speed for your ap-
pliance or higher.
d) Only use saw blades with a dia-
meter of 140 mm corresponding
to the markings on the saw bla-
de.
e) Make sure the tips of the saw
teeth do not overheat.
f) When sawing plastic, make sure
the plastic does not melt.
g) Pay attention to the maximum
cutting depth. (see technical
data)
h) When sawing, wear a dust
mask.
i) Always wear hearing protection!
j) Do not use any accessories (see
section "Spare parts/accesso-
ries") that are not recommended
by PARKSIDE. This­can­result­in­elect-
ric­shock­or­fire.
Residual risks
Even­if­properly­operating­and­handling­
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a)­ Cuts
b)­ Ear­damage­if­working­without­ear­pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic­field­which,­under­certain­circum-
stances, may impair the functionality of ac-
tive­or­passive­medical­implants.­To­reduce­
the­risk­of­serious­or­lethal­injuries,­we­rec-
ommend that persons with medical im-
plants consult their doctor and the manu-
facturer of their medical implant before op-
erating the machine.
GB MT
33

Publicidad

loading