Publicidad
Idiomas disponibles
Idiomas disponibles
SD 2000
Installation:
Drill two holes in wall and have a distance of 1.8m from the ground. The diameter of the hole just contained
the inflated plastic pipe. After tucked the inflated plastic pipe, fixed pothook on the pipe with screw. Make
sure pothook fastness and hang the heater. The clip under the pothook should be inserted rabbet of the
heater bottom.
Function operation (both machine & remote control)
F
1. Plug in and switch on by pressing the red switch 0/I, enter into standby mode
and display shows"S ":
2. Press"
" button for one time, enter into fan mode and the display show "--" .press
second time ,the product works with low heating(1000W) and display shows"-- /
". Press third time,
changes to high heating(2000W) and display shows "--/
".then press fourth time ,enter into stand
by mode.
20
Publicidad
