Pioneer DEH-P5530MP Manual De Instrucciones página 16

Section
RDS
05
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP (
tor will light.
2 Press TA to turn traffic announcement
standby on.
Press TA and TA ON appears in the display.
The tuner will standby for traffic announce-
ments.
# To turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
# You can also cancel the announcement by
pressing SOURCE, BAND, a, b, c or d while a
traffic announcement is being received.
16
En
HHHHHHHHHHHHHH
! You can also turn on or off TA function in the
menu that appears with the pressing of
FUNCTION.
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other networks TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Responding to the TP alarm
When a TP or enhanced other networks TP
) indica-
station is lost due to a weak signal the TP
(
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other networks TP station.
% When listening to the tuner, tune in an-
other TP or enhanced other networks TP
station.
Using PTY functions
You can tune in a station by using PTY infor-
mation.
Searching for a RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed on page
19.
1 Press FUNCTION to select program type
selection (PTY).
Press FUNCTION until program type appears
in the display.
Notes
) indicator is extinguished and a series of