Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
If child is not secured properly,
child could be ejected in a
sudden stop or crash, resulting
in serious injury or death.
PIPA RELX
™
Installation Using Rigid
Latch (Lower Anchors)
1
- Rotate rigid latch (lower
anchors) down and point them
away from base.
2
- Position base in a forward
facing vehicle seat with the
stability leg deployed (if using)
(p.34).
It is recommended that you use the
stability leg, which reduces crash
forces in the event of an accident.
3
- If preferred, install latch guides
on vehicle
bars.
4
- Grasp rigid latch anchors and push
down and forward to connect to
vehicle lower anchor bars.
Be sure that the base bottom is
firmly seated on vehicle seating
surface and there is no gap
between the base bottom and
vehicle seat.
(continued on the next page)
38 PIPA lite rx instructions
Base
lower anchor
1
2
3
4
PIPA lite rx instructions
39
Publicidad
