Imetec Bellissima S2201 Instrucciones De Uso página 16

USER INSTRUCTIONS
• Connect the power cord (7) to the mains and position the styler on a smooth
and heat resistant surface. Push the On/Off button (5) to switch on the
appliance.
EN
• Select the desired temperature using the temperature selector (4); the
temperature can be changed at any time simply by scrolling the selector (4).
• The display (3) flashes on and off until the curling iron reaches the set
temperature.
• When the temperature is reached, the display (3) stays on permanently and
an acoustic signal is emitted.
• Take a lock of hair, which is not too wide or voluminous between the finger
(about 2 cm); more defined curls are obtained with smaller locks of hair.
• Insert the strand into the slot between the heated parts (2), keeping the
styler horizontal and close to the root.
• Rotate the styler by 360°, sliding it along the entire strand, moving
downwards. For a more pronounced curl, keep rotating the styler and slide
more slowly.
• If desiring a more sustained curl, proceed very slowly and add additional
rotations that will help the hair lock adhere better to the heated parts (2).
• Once styling operations have terminated, shut off the appliance by pushing
the On/Off selector, disconnect the power cord from the socket (7) and let
the instrument cool down completely before putting it away.
NOTE: It is possible that steam develops during straightening;
this is excess humidity in the hair that evaporates. Make sure that
the tip of the hair lock is always positioned in the lower area of the
barrel in order to improve smoothness and lock release.
o n .
MAINTENANCE AND CLEANING
• Disconnect the appliance from the power supply (7).
WARNING! Always disconnect the
appliance from the mains
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
14
before