Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Maintenance (continued)
4. The fabric HEPA filter can also be rinsed under water and then left to air dry.
5. Once the HEPA filter is fully dry, replace the filter back into mesh filter, and
then back into the dust container.
Note: Do not use a washing machine to clean the dust filter, or a hair dryer to dry
the filter.
Clearing Blockages
If your vacuum has a blockage, the blockage indicator will light up.
Ensure that the vacuum is not plugged in or switched on before looking for
blockages.
Be careful not to switch it on during the unblocking process and be aware of any
sharp objects that could be stuck in the vacuum.
Cleaning the Whole Vacuum
If the body of the main unit or handle needs to be cleaned, use a damp well-
wrung cloth to wipe over the surface. Then use a dry cloth to dry the surface.
CAUTION:
Do not immerse any part of the vacuum main unit in water or any other
liquid.
15
Publicidad
