Duronic VC24 Manual De Instrucciones página 16

Cleaning and Maintenance (continued)
Removing and Cleaning the Floor Brush
1. Unplug the vacuum from power
supply.
3. Lift the roller out and clean the
hair or any other foreign matter
from the roller brush.
5. Leave the roller brush to air dry
for at least 24 hours.
2. Slide the brush lock outwards to
the unlocked position.
4. Wash the roller brush with water.
6. Install the roller brush back into
the floor brush assembly. Slide
the lock inwards until it is locked
into place.
16