Extel WEVA 2 Instrucciones De Uso E Instalación página 50

8. APPLICATIONS
a. Camera Setup
1• Camera Brightness :
Press OK to enter Camera Brightness ajustement bar.
Press to adjust brightness, press OK to confirm and exit.
2• Pairing :
Press , then press OK to enter Pairing menu, system will count down 60 seconds (fig.5-1) in the control box
wihin 60 seconds. Once pairing completed, it will display image of door unit.
N.B. : It strongly recommeded to pair with door unit before installation.
Press ESC to exit.
1•
b. Recorder Setup (the recorded sequences are in file «.avi»)
1• Visiting record :
N.B. : If no answering, answering unit will record 30 seconds and then screen will be turned off automatically.
The indicator will signal an unread recording
2• SD card format :
Press OK to enter SD card format
Select & press OK to format
N.B. : Make sure SD card is unlocked (Comments p11). For first time use, it'is recommended to format SD card
3• SD card overwrite :
by the most recent ones.
Use to select ON/OFF, press OK to save
Press ESC to exit.
1•
c. Event List
1• In view mode :
Press OK to enter record folder.
Continue to press OK to play/pause file.
2• Inplaying mode :
Press to adjust the volume
Press to fast backward 2x, 4x, 8x &16x
Press ESC to stop and exit
GB7
Use to set ON/OFF
If the card is full, this mode is used to select permanent overwriting of the first recordings
2•
CFI EXTEL WEVA 2 - 01/2013
http://www.bakonline.net/
2•
3•