Batavia BT-NXS004 Manual De Usuario página 14

English
10. Technical data
Battery voltage: . . . . . . . . . . 18 V Li-Ion
No load speed: . . . . . . . . . . . 3200 min
No load chain speed: . . . . . . . . . 4.7 m/s
Total sword length: . . . . . . . . . .154 mm
Effective sword length: . . . . . . . .120 mm
Max. cutting depth: . . . . . . . . . .120 mm
Product weight without accessories:
. . . . . . . . . . . . . . . . . . . . . . . 1.6 kg
Sound pressure level L
Multi-saw: . . . . . . . . . . . 82.57 dB(A)
Pruner (with extension pole): .81.60 dB(A)
Uncertainty K : . . . . . . . . . . . . 3 dB(A)
pA
Sound power level L
Multi-saw: . . . . . . . . . . . 93.57 dB(A)
Pruner (with extension pole): 92.81 dB(A)
Uncertainty K : . . . . . . . . . . . . 3 dB(A)
WA
Hand/arm vibration
Multi-saw: . . . . . . . . . . . . 1.036 m/s
Pruner (with extension pole)
Front: . . . . . . . . . . . . . . . 1.351 m/s
Rear: . . . . . . . . . . . . . . . 0.400 m/s
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
Vibration level
10.1
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard
test method (EN 62841) and may be used
for comparing one tool with another. The
declared vibration total value may also be
used in a preliminary assessment of
exposure.
Warning!
The vibration and noise emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used, in particular,
what kind of work piece is machined.
It is necessary to identify safety measured
to protect the operator that are based on an
estimation of exposure in the actual condi-
tions of use (taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is run-
ning idle in addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
12
pA
WA
using the tool, limiting working time, and
using accessories in good condition.
-1
11. Accessories – optionally
available
Titanium coated chain 6" Item-No. 7064349
Bar 6" . . . . . . . . . . . Item-No. 7064350
Bar protector 6" . . . . . Item-No. 7064386
Extension pole . . . . . . Item-No. 7063826
18 V Chain Sharpener . . Item-No. 7063640
12. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
2
made from various materials such as met-
als and plastics. Take defective compo-
2
nents to a special refuse collection point.
2
Ask about these at your specialist shop or
2
local council.
Batteries
12.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse. Do not dispose of by burning, risk of
explosion.