Boneco P300 Manual De Instrucciones página 45

REPLACE THE UV LAMP
ABOUT THE UV LAMP
The UV lamp is a consumable and must be replaced
after a certain amount of time. The BONECO P300 has
an internal timer. After an operating time of 12,000
hours, the appliance alerts you to the upcoming
lamp change with the UV warning on the display:
If you continue to use the spent UV lamp for a
longer time, the effectiveness of the disinfec-
tion will decrease significantly.
REMOVING A USED UV LAMP
1. Disconnect the BONECO P300 from the power
outlet.
2. Open the rear cover.
3. Wait 5 minutes and let the used UV lamp cool
down.
4. Remove the filter.
5. Unscrew the four screws to remove the cover of
the UV lamp.
6. Pull the UV lamp out of the housing.
7. Open the clip on the cable to disconnect the UV
lamp from the appliance.
45
en